Car Carrier from a 2X4
This was one of Brayden’s favorite Christmas presents from his uncle Josh. Nothing like a handmade gift!
I’ll post plans for this as soon as my brother-in-law shows me how he did it.
This was one of Brayden’s favorite Christmas presents from his uncle Josh. Nothing like a handmade gift!
I’ll post plans for this as soon as my brother-in-law shows me how he did it.
No products in the cart.
Has Uncle Josh ever givin up the plans for the Toy car carrier
Haha he hasn’t. I need to get that template from him. I’ll let you know when I do.
Please do! Would love to try making one of these!
Here is a template http://www.instructables.com/id/Wooden-Toy-Hauler/
Yes please.
Try these plans: http://www.instructables.com/id/Wooden-Toy-Hauler/
Not sure if I posted my picture. So here it is again 🙂
That is awesome Karen! Thank you so much for sharing with everyone.
I’d like to know how he made the wheels. I like how he shaped them to get a wheel and tire look to them.
Those can be purchased. http://amzn.to/1ryrfnL
These were not purchased. I made them. The ones you can buy look nothing like these.
I used a hole saw to cut out the wheel from a 2X4 then used a 1″ paddle bit to hollow out the center. I used a router with a round over bit to shape the inside of the hole to look like a rim then slightly rounded the outer edge with the round over. I cut the treads with a dremel cuttijng wheel.
This is the type bit I used for the center of the wheel.
I’ve made a couple of these, but I spray painted mine. Here is the link I got my directions from http://www.instructables.co… Thank you for posting your project! I wish I had time to make them all
Thanks again for sharing!