Wine Bottle Bird Feeder
$0.00
Printable wine bottle bird feeder plans for a 12-3/4″ tall cedar feeder built from one 1x2x8′ board and a scrap of 1×6. The PDF includes full dimensions, a cut list with the 45 degree corner cuts, and 4 illustrated steps. Instant download.
Free plan — we'll email your download link, along with weekly build ideas and new free plans. Unsubscribe anytime.
✓ Instant download · Personal use license · Secure checkout via Stripe
Description
Wine bottle bird feeder plans: one cedar 1×2 and an empty bottle
This is the wine bottle bird feeder I built for our back yard. We’d seen the wine bottle feeder idea around and wanted to make it our own. The bottle hangs neck down inside a small cedar frame, with the mouth set 1/2″ above the base so seed can spill out onto it. The whole thing is one 1x2x8′ cedar board plus a short piece of 1×6, glued and brad nailed together. I built mine from scrap cedar I had lying around.
What you get
- Printable PDF plan, instant download
- Full dimensions
- Cut list for the 1×2 and 1×6, including the 45 degree corner cuts on the octagon pieces
- 4 illustrated steps, from the frame to the top and bottom trim
Specs
- Overall size: 12-3/4″ tall x 7″ wide x 7″ deep
- Bottle: any empty wine bottle (you size the hole to your bottle)
Lumber you’ll need
- 1 board, 1x2x8′ cedar (frame posts and trim)
- 1×6 cedar, about 18″ of it (the three octagon pieces, so scrap works)
Hardware and supplies
- 1-1/4″ brad nails
- Wood glue
- Empty wine bottle
- Eyelets and wire for hanging
Tools you’ll need
- Drill, plus a bit for the 2″ hole in the bottle support
- Miter saw
- Jigsaw for the bottle hole in the top piece
- Brad nailer
- Tape measure and pencil
- Safety glasses and hearing protection
Common questions
Will my wine bottle fit? Yes. The top octagon gets a hole cut with a jigsaw just slightly larger than your bottle’s diameter, so measure your bottle first and cut to it. The support below it gets a 2″ hole for the neck.
How far should the bottle sit from the base? Set the support so the mouth of the bottle is 1/2″ from the base, check it for level, then nail the support in place.
How do I hang it? Hang it however you like, but installing eyelets and hanging it with wire is the way I prefer.
Want to read through it first? The full build is on the blog: DIY wine bottle bird feeder.
Quick answers










Reviews
There are no reviews yet.