Wine Bottle Bird Feeder

$0.00

Printable wine bottle bird feeder plans for a 12-3/4″ tall cedar feeder built from one 1x2x8′ board and a scrap of 1×6. The PDF includes full dimensions, a cut list with the 45 degree corner cuts, and 4 illustrated steps. Instant download.

Buy Now →

Free plan — we'll email your download link, along with weekly build ideas and new free plans. Unsubscribe anytime.

✓ Instant download · Personal use license · Secure checkout via Stripe

SKU: RE-BIRD-FEEDER Categories: , , ,

Description

Wine bottle bird feeder plans: one cedar 1×2 and an empty bottle

This is the wine bottle bird feeder I built for our back yard. We’d seen the wine bottle feeder idea around and wanted to make it our own. The bottle hangs neck down inside a small cedar frame, with the mouth set 1/2″ above the base so seed can spill out onto it. The whole thing is one 1x2x8′ cedar board plus a short piece of 1×6, glued and brad nailed together. I built mine from scrap cedar I had lying around.

What you get

  • Printable PDF plan, instant download
  • Full dimensions
  • Cut list for the 1×2 and 1×6, including the 45 degree corner cuts on the octagon pieces
  • 4 illustrated steps, from the frame to the top and bottom trim

Specs

  • Overall size: 12-3/4″ tall x 7″ wide x 7″ deep
  • Bottle: any empty wine bottle (you size the hole to your bottle)

Lumber you’ll need

  • 1 board, 1x2x8′ cedar (frame posts and trim)
  • 1×6 cedar, about 18″ of it (the three octagon pieces, so scrap works)

Hardware and supplies

  • 1-1/4″ brad nails
  • Wood glue
  • Empty wine bottle
  • Eyelets and wire for hanging

Tools you’ll need

  • Drill, plus a bit for the 2″ hole in the bottle support
  • Miter saw
  • Jigsaw for the bottle hole in the top piece
  • Brad nailer
  • Tape measure and pencil
  • Safety glasses and hearing protection

Common questions

Will my wine bottle fit? Yes. The top octagon gets a hole cut with a jigsaw just slightly larger than your bottle’s diameter, so measure your bottle first and cut to it. The support below it gets a 2″ hole for the neck.

How far should the bottle sit from the base? Set the support so the mouth of the bottle is 1/2″ from the base, check it for level, then nail the support in place.

How do I hang it? Hang it however you like, but installing eyelets and hanging it with wire is the way I prefer.

Want to read through it first? The full build is on the blog: DIY wine bottle bird feeder.

Reviews

There are no reviews yet.

Be the first to review “Wine Bottle Bird Feeder”

Your email address will not be published. Required fields are marked *

Quick answers

Questions about this plan

How do I download my plan after purchase?
You will receive a download link in your order confirmation email. You can also log in at My Account → Downloads any time to re-download.
What format is the plan?
Every plan is a printable PDF designed for standard letter paper. View on screen in your shop, or print at home or your local print shop.
Can I sell what I build from this plan?
Yes — on a small scale. Most builders selling at local markets, online, or to friends are well within the license. Mass production or reselling the plan itself is not allowed. See the Plan License.
Do you offer refunds?
Digital downloads are generally final — see our Refund Policy. If there is a legitimate issue with the plan or your access, email support@rogueengineer.com.
Can I modify the plan dimensions or materials?
Yes — modify dimensions, materials, finishes, and joinery as you like for your own project. See the Plan License for what you can do with modified versions.