Laundry Room Slim Rolling Storage Cart
$0.00
Printable slim rolling storage cart plans for a 37-1/2″ tall, 11-1/4″ wide laundry cart that slides between your washer and dryer. Built from two 1x12s and two 1x4s. The PDF includes full dimensions, a cut list, custom sizing notes and 3 illustrated steps. Instant download.
Free plan — we'll email your download link, along with weekly build ideas and new free plans. Unsubscribe anytime.
✓ Instant download · Personal use license · Secure checkout via Stripe
Description
Slim rolling storage cart plans for the gap beside your washer and dryer
I drew up these plans for Beckie at Infarrantly Creative, who wanted a slim rolling storage cart to tuck in between her washer and dryer and hold all the laundry room essentials. It’s 11-1/4″ wide, the width of a single 1×12, with three railed shelves, casters and a pull handle so it slides out when you need it. The whole cart comes out of four boards with glue, brad nails and pocket screws.
What you get
- Printable PDF plan, instant download
- Full dimensions
- Cut list for the 1×4 and 1×12 boards
- Custom sizing notes so you can fit the cart to your own gap
- 3 illustrated steps: shelves, cart assembly and hardware
Specs
- Overall size: 37-1/2″ tall x 27″ deep x 11-1/4″ wide (height includes 1-1/2″ casters)
- Storage: 3 shelves with front and back rails
Lumber you’ll need
- 2 boards, 1x12x8′ pine (sides and shelves)
- 2 boards, 1x4x8′ pine (shelf rails)
Hardware and supplies
- 1-1/4″ pocket hole screws
- 1-1/4″ brad nails
- Wood glue
- 4 casters (2 swivel, 2 fixed)
- Drawer pull for the handle
Tools you’ll need
- Pocket hole jig
- Drill
- Miter saw
- Brad nailer
- Tape measure and pencil
- Safety glasses and hearing protection
Common questions
Can I change the size to fit my gap? Yes, and the plan shows you how. The width is the actual width of the 1×12 (11-1/4″), so change that board to change the width. For depth, take your required depth minus 1-1/2″ and use that in place of every 25-1/2″ part. For height, the 36″ sides should be your total height minus the height of your casters.
Which casters should I use? I recommend fixed casters on the back of the cart and swivels on the front. The fixed casters keep it tracking straight, which makes sliding it in and out of a tight gap much easier.
How does it go together? Glue and nail each shelf to its rails, drilling pocket holes as you go. Then glue and screw the shelves between the 1×12 sides with 1-1/4″ pocket screws, and nail the shelf rails to the front and back.
Want to read through it first? The full plan is on the blog: slim rolling laundry storage cart.
Quick answers









Reviews
There are no reviews yet.