Book Rack Console Table
A console table that holds books, what a great idea! I’ve been noticing a lot of these v-shaped book shelves lately and I really like the idea. Jamie decided that we needed one for the guest room, and well, you know how the rest of the story goes. I laid it out in CAD and got to work. The cool part about this table is it is super simple to build and I was able to do it for under $75! Enjoy the plans below!
For sneak peeks of our upcoming projects be sure to follow me on Facebook and Instagram. Also, follow me on Pinterest to get tons of projects plans from all around the web!
Required Tools
Materials
- 3x 2 x 2 x 8′ (Select Pine; S4S)
- 3x 1 x 8 x 8′ (Common boards; Pine)
- Select pine is optional.
- 2-1/2″ Pocket Hole Screws (Coarse)
- 1-1/4″ Pocket Hole Screws (Coarse)
- 1-1/4″ Brad Nails
- 2″ Wood Screw
Disclosure: The links provided in the “materials” and “required tools” sections are affiliate links. If you would like to support our site and help keep our content free come find out more about how we can make money with no extra cost to you.
Dimensions
Cut List
How to build a console table with a book shelf
Questions? Comments?
As always, if you have any questions don’t hesitate to comment below and especially don’t forget to post pictures of your finished products in the comments! ENJOY!
How was this finished? Love the white wash looking finish
Thanks, I first stained it with Rust-Oleum’s worn navy stain, then made a white wash with Rust-Oleum linen white chalk paint and water, and put on using a stain rag.
Hello! This book rack is just what I have been looking for! I would love to put this in my kitchen to hold my cookbooks, but I was wondering if this book rack would be deep enough to hold them. In your picture, you have smaller books — do you think this book rack could accommodate larger books? My largest cookbook is about 8 1/2″ x 11″. If not, would it be pretty easy to modify these plans — maybe use 1x10s instead of 1x8s? Thanks for any help you can offer!
Tammie it will definitely hold larger books. We have large books in there now and it works perfectly.
Great design. I am going to build this over the Christmas break. Can you tell me what the height of the triangular pieces should be? I see the widths at 5-1/4 and 5-5/8 but no height.
Thanks Matthew and good luck. Those triangular pieces are cut at 45 degrees so the height is the same as the widths. Sorry I forgot to include that.