Boxwood Lantern
$0.00
Printable plans for a rustic wooden lantern, 7-1/2″ square and 14″ tall in the plan, with a note on cutting the sides for any height. Each one is built from a single 2×4 ripped into 1/2″ strips. Includes the cut list, step diagrams, and a tools and materials list.
Free plan — we'll email your download link, along with weekly build ideas and new free plans. Unsubscribe anytime.
✓ Instant download · Personal use license · Secure checkout via Stripe
Description
Wooden lantern plans: a rustic boxwood lantern from one 2×4
Jamie fell for a lantern at the Boxwood store in downtown Dexter, MI, so we built our own version. Each lantern comes out of a single 2×4: you rip it into 1/2″ thick strips on the table saw, cut the strips to length, and glue and brad-nail them into a top, a bottom, a lid and four open side frames. We made three at different heights, stained each one a different color and set them outside with candles inside. It takes one board and a few tools.
What you get
- Printable PDF plan, instant download
- Dimensions
- Cut list for every strip, with a note on adjusting the side length for taller or shorter lanterns
- Step-by-step diagrams for the top, bottom, lid, sides and final assembly
- Tools and materials list
Specs
- Size shown in the plan: 7-1/2″ x 7-1/2″ footprint, 14″ tall
- Height options: pick your side length. My tallest is 17″ (16″ sides plus the 1/2″ top and bottom); the others use 12″ and 14″ sides
- Estimated lumber cost: about $3 per lantern (one 2×4)
Lumber you’ll need
- 1 board, 2x4x8′ premium stud per lantern, ripped into four 1/2″ thick boards
Hardware and supplies
- Brad nails (1-1/4″ on the materials list; the steps call for 3/4″ on the sub-assemblies and 1″ for final assembly)
- Wood glue
- Stain and satin spray polyurethane (we used Varathane Worn Navy, Barn Red and Briarsmoke)
- Battery-operated LED flameless candles
Tools you’ll need
- Table saw for ripping the 1/2″ strips
- Miter saw or table saw for the crosscuts
- Brad nailer
- Tape measure and pencil
- Safety glasses and hearing protection
Common questions
Can I make it taller or shorter? Yes. Everything but the side boards stays the same. Cut the eight long side pieces to your total height minus 1″ and the lantern grows or shrinks around them.
Why rip a 2×4 instead of buying thin boards? Cost. One premium stud gives you every piece for a lantern, which is how it comes in around $3.
What goes inside? We used battery-operated LED flameless candles in all three.
Want to see it first? The full build is on the blog: boxwood lantern. The same shop inspired my boxwood candle holders, which make a good matching set.
Quick answers









Reviews
There are no reviews yet.