Tapered Leg Side Table
$0.00
Printable tapered leg side table plans for a 24″ tall table with splayed, tapered legs, built from one 2×4, one 2×2 and a 1×10 in about a day. The PDF includes full dimensions, a cut list with every angle, 4 illustrated steps and a tools and materials list. Instant download.
Free plan — we'll email your download link, along with weekly build ideas and new free plans. Unsubscribe anytime.
✓ Instant download · Personal use license · Secure checkout via Stripe
Description
Tapered leg side table plans: splayed legs from a single 2×4
This side table is a simple build with accessible lumber, dressed up with two small tricks: the legs are tapered and they’re angled out. That’s all it takes to turn a basic box-and-legs table into something that looks a lot better. It’s three boards, a 2×4, a 2×2 and a 1×10, joined with pocket screws, and it’s a one-day, beginner-level project. Use the same ideas on your next build to spruce it up.
Watch the build
What you get
- Printable PDF plan, instant download
- Full dimensions
- Cut list with the 8 degree leg cuts and 45 degree apron cuts marked
- 4 illustrated steps: cutting the taper, the base, the top and final assembly
- Tools and materials list
Specs
- Overall size: 24″ tall x 22″ wide x 18-1/2″ deep
- Build time: 1 day
- Skill level: Beginner
- Estimated cost: about $25
Lumber you’ll need
- 1 board, 2x4x8′ (four tapered legs)
- 1 board, 2x2x8′ (base frame)
- 1 board, 1x10x4′ (two-board top)
Hardware and supplies
- 2-1/2″ pocket screws (base)
- 1-1/4″ pocket screws (top)
- 2″ wood screws (top to base)
- 2″ brad nails
- Wood glue
Tools you’ll need
- Pocket hole jig
- Drill/driver
- Miter saw
- Circular saw, a straight edge and a clamp for the leg tapers
- Brad nailer
- Tape measure and pencil
- Safety glasses and hearing protection
Common questions
How do you cut the tapered legs? Mark the cut line on each 2×4 leg with a straight edge, using the 1-1/2″ marks shown in the plan, then clamp the leg and cut the taper with a circular saw. No table saw or taper jig needed.
How does the base go together? Drill the pocket holes, tack the base together upside down with 2″ brad nails, then flip it right side up and finish it with 2-1/2″ pocket screws.
How is the top attached? The two 1×10 boards are joined with 1-1/4″ pocket screws. Then center the base on the underside of the top and drive 2″ wood screws up through the frame.
Want to see it come together first? The full build is on the blog: DIY tapered leg side table.
Quick answers









1 review for Tapered Leg Side Table
There are no reviews yet.