Tapered Leg Side Table

$0.00

Printable tapered leg side table plans for a 24″ tall table with splayed, tapered legs, built from one 2×4, one 2×2 and a 1×10 in about a day. The PDF includes full dimensions, a cut list with every angle, 4 illustrated steps and a tools and materials list. Instant download.

Buy Now →

Free plan — we'll email your download link, along with weekly build ideas and new free plans. Unsubscribe anytime.

✓ Instant download · Personal use license · Secure checkout via Stripe

SKU: RE-TAPERED-LEG-SIDE-TABLE Categories: ,

Description

Tapered leg side table plans: splayed legs from a single 2×4

This side table is a simple build with accessible lumber, dressed up with two small tricks: the legs are tapered and they’re angled out. That’s all it takes to turn a basic box-and-legs table into something that looks a lot better. It’s three boards, a 2×4, a 2×2 and a 1×10, joined with pocket screws, and it’s a one-day, beginner-level project. Use the same ideas on your next build to spruce it up.

Watch the build

What you get

  • Printable PDF plan, instant download
  • Full dimensions
  • Cut list with the 8 degree leg cuts and 45 degree apron cuts marked
  • 4 illustrated steps: cutting the taper, the base, the top and final assembly
  • Tools and materials list

Specs

  • Overall size: 24″ tall x 22″ wide x 18-1/2″ deep
  • Build time: 1 day
  • Skill level: Beginner
  • Estimated cost: about $25

Lumber you’ll need

  • 1 board, 2x4x8′ (four tapered legs)
  • 1 board, 2x2x8′ (base frame)
  • 1 board, 1x10x4′ (two-board top)

Hardware and supplies

  • 2-1/2″ pocket screws (base)
  • 1-1/4″ pocket screws (top)
  • 2″ wood screws (top to base)
  • 2″ brad nails
  • Wood glue

Tools you’ll need

  • Pocket hole jig
  • Drill/driver
  • Miter saw
  • Circular saw, a straight edge and a clamp for the leg tapers
  • Brad nailer
  • Tape measure and pencil
  • Safety glasses and hearing protection

Common questions

How do you cut the tapered legs? Mark the cut line on each 2×4 leg with a straight edge, using the 1-1/2″ marks shown in the plan, then clamp the leg and cut the taper with a circular saw. No table saw or taper jig needed.

How does the base go together? Drill the pocket holes, tack the base together upside down with 2″ brad nails, then flip it right side up and finish it with 2-1/2″ pocket screws.

How is the top attached? The two 1×10 boards are joined with 1-1/4″ pocket screws. Then center the base on the underside of the top and drive 2″ wood screws up through the frame.

Want to see it come together first? The full build is on the blog: DIY tapered leg side table.

1 review for Tapered Leg Side Table

There are no reviews yet.

Be the first to review “Tapered Leg Side Table”

Your email address will not be published. Required fields are marked *

Quick answers

Questions about this plan

How do I download my plan after purchase?
You will receive a download link in your order confirmation email. You can also log in at My Account → Downloads any time to re-download.
What format is the plan?
Every plan is a printable PDF designed for standard letter paper. View on screen in your shop, or print at home or your local print shop.
Can I sell what I build from this plan?
Yes — on a small scale. Most builders selling at local markets, online, or to friends are well within the license. Mass production or reselling the plan itself is not allowed. See the Plan License.
Do you offer refunds?
Digital downloads are generally final — see our Refund Policy. If there is a legitimate issue with the plan or your access, email support@rogueengineer.com.
Can I modify the plan dimensions or materials?
Yes — modify dimensions, materials, finishes, and joinery as you like for your own project. See the Plan License for what you can do with modified versions.