Toddler Bed Rail
$0.00
Printable plans for a solid wood toddler bed rail made from one 2×4 and two 1x4s. It’s 42″ long, the legs are sized to your mattress height plus 8″, and a keeper frame under the mattress holds it in place with no hardware. Includes a cut list, dimensions and 3 illustrated steps.
Free plan — we'll email your download link, along with weekly build ideas and new free plans. Unsubscribe anytime.
✓ Instant download · Personal use license · Secure checkout via Stripe
Description
Toddler bed rail plans: a solid wood guard rail that fits any bed
When our son moved to a big bed, I didn’t want a plastic mesh rail, so I built this one from a 2×4 and two 1x4s. There are no straps, brackets or wall anchors. A U-shaped 1×4 “keeper” frame slides between the mattress and the box spring, and the weight of the mattress holds the rail upright. The legs are cut to your mattress height plus 8″, so it fits whatever bed you have. The whole thing goes together with pocket screws in an afternoon, for about $15 per rail.
What you get
- Printable 2-page PDF plan, instant download
- Dimensions, including how to size the legs to your bed
- Board cut list
- 3 illustrated steps: the rail, the keeper and final assembly
Specs
- Rail length: 42″
- Keeper depth: 17-1/2″ (the part that slides under the mattress)
- Height: your mattress height plus 8″
- Build time: an afternoon
- Estimated cost: about $15 per rail
Lumber you’ll need
- 1 board, 2x4x72″ (legs)
- 2 boards, 1x4x72″ (rails and keeper)
Hardware
- 1-1/4″ pocket screws (that’s the only fastener in the build)
Tools you’ll need
- Pocket hole jig
- Drill/driver
- Miter saw
- Tape measure, pencil and safety gear
Common questions
How tall should the legs be? Measure from the floor to the top of the box spring, add the mattress, then add 8″. That puts the top rail a safe height above the sleeping surface on any bed.
What holds it in place? The keeper. It’s a flat 1×4 U that screws to the rail legs at box-spring height and slides under the mattress. The mattress, and your kid on it, pins the rail upright. When the phase is over, it lifts right out.
Does it fit my bed? Yes. The only measurement that changes is the leg length, and that comes from your own mattress height.
Want to see it built first? The full walkthrough is on the blog: DIY toddler bed rail. If you’re building a bigger kid setup, check out my 2×4 bunk bed.
Quick answers









Reviews
There are no reviews yet.