Outdoor Bench – 2x6s
$10.00
Printable 2×6 outdoor bench with back plans: a Leopold-style bench with a reclined back, 33″ tall x 51″ wide x 23″ deep, built from four 2x6s with three tools in about 30 minutes. Instant PDF download with full dimensions, an angled cut list, step-by-step diagrams and a shopping list.
✓ Instant download · Personal use license · Secure checkout via Stripe
Build the whole setGet 5 outdoor favorites in one download — the Backyard Bundle$34Save $21See the bundle →Description
2×6 outdoor bench with back plans: four boards, three tools, about 30 minutes
This is my take on the classic Leopold bench, built from nothing but four 2x6s. I liked how simple the original is, but I changed the angles for a more comfortable seat and a proper reclined back. Two angled cuts per leg and a taper on the back leg do all the work. It takes $25 to $50 in lumber, a drill, a saw and a speed square, and roughly 30 minutes. If you’ve never built furniture before, start here.
Watch the build
What you get
- Printable PDF plan, instant download
- Full dimensions
- Cut list with every angle and the back taper
- Step-by-step diagrams, from the legs to the seat and back boards
- Tools and lumber shopping list
Specs
- Overall size: 33″ tall x 51″ wide x 23″ deep
- Seat and back: four 48″ 2x6s with 3/4″ gaps
- Build time: about 30 minutes
- Skill level: Beginner
- Estimated lumber cost: $25 to $50
Lumber you’ll need
- 4 boards, 2x6x8′ pressure treated (untreated is fine if you paint or seal it)
Hardware
- 3″ exterior wood screws, ACQ rated
Tools you’ll need
- Drill/driver
- Circular saw (a miter saw is optional for the angles)
- Speed square to mark every angled cut
- Tape measure and pencil
- Safety glasses and hearing protection
Common questions
How is this different from a Leopold bench? It’s a spin-off of the Leopold, named after conservationist Aldo Leopold, who built them for birdwatching. I varied the angles for a more comfortable seat and a proper back. Two angled cuts per leg give it a real recline, and it’s far more comfortable than the original.
Do I need a miter saw? No. Mark the angles with a speed square by pivoting it on its corner until the angle lines up with the edge of the board, then cut with a circular saw.
Does it have to be pressure treated? For a bench that lives outside, treated is the easy choice. Untreated 2x6s work fine if you paint or seal them.
Want to see it first? The full walkthrough is on the blog: DIY 2×6 outdoor bench with back. If you want a beefier version, see the 2×8 outdoor bench with back, or compare all our outdoor bench plans. The modern Adirondack chair pairs with it.
You may also like…
Quick answers











14 reviews for Outdoor Bench – 2x6s
There are no reviews yet.