Party Bucket Table

DIY Party Bucket Table - Rogue Engineer 1

DIY Party Bucket Table - Rogue Engineer 2

An ice bucket is a welcomed addition to any tailgate. Here’s an easy way to step up your game. A simple stand to get you’re bucket off the ground along with the addition of a tabletop should do it! Be sure to check out the DIY tailgate TV setup to go with it!

For sneak peeks of our upcoming projects be sure to follow me on Facebook and Instagram. Also, follow me on Pinterest to get tons of projects plans from all around the web!

Materials

Disclosure: The links provided in the “materials” and “required tools” sections are affiliate links. If you would like to support our site and help keep our content free come find out more about how we can make money with no extra cost to you.

How to build a Ice Bucket Stand with Table Top

Start by assembling the stand slightly larger than the bucket. I used pocket holes and 2-1/2″ pocket screws to assemble.

DIY Party Bucket Table - Step 5

DIY Party Bucket Table - Step 6

DIY Party Bucket Table - Step 7

Cut 4 pieces of PVC about 8″ for the base of the table. Make sure it will fit inside the base of the buck with the cross and elbows attached.

DIY Party Bucket Table - Step 3

DIY Party Bucket Table - Step 1

After applying stain and poly to the tabletop, attach the caps by drilling holes in them and screwing to the top with 1-1/4″ wood screws. Locate the caps in conjunction with the PVC and fittings shown above.

DIY Party Bucket Table - Step 2

DIY Party Bucket Table - Step 4

Cut the legs to the table such that the height of the table is about 42″. We painted the table base with a metallic spray paint.

DIY Party Bucket Table - Step 1

DIY Party Bucket Table - Rogue Engineer 3

Now add ice and drinks and you’re done!

Questions? Comments?

As always, if you have any questions don’t hesitate to comment below and especially don’t forget to post pictures of your finished products in the comments! ENJOY!

About The Author

Related Posts