Outdoor Chair
$10.00
Printable plans for an easy outdoor chair with a deep reclined slat back that’s comfortable with no cushions. It’s 48″ tall x 28″ wide x 36″ deep and built from two 5/4 deck boards and four treated 2x4s with exterior screws. Includes a cut list with angles, dimensions and 4 illustrated steps.
✓ Instant download · Personal use license · Secure checkout via Stripe
Build the whole setGet 5 outdoor favorites in one download — the Backyard Bundle$34Save $21See the bundle →Description
Easy outdoor chair plans: a reclined slat back that’s comfortable with no cushions
This is the simple, comfortable one in my outdoor chair lineup. The back leans way back on two angled 2×4 supports, the seat is three wide deck boards, and the boxy 2×4 frame gives you wide, flat 2×4 arms. It’s comfortable without cushions, and these are the chairs around our fire pit. Everything is straight cuts and exterior screws, no pocket holes, so a drill, a circular saw and a speed square get you there. It’s a beginner build, done in a day, for about $30 in treated lumber.
What you get
- Printable 4-page PDF plan, instant download
- Overall dimensions
- Cut list with every angle, plus a detail for the back support wedge
- 4 illustrated steps, from the side frames to the seat and back slats
- Tools and materials shopping list
Specs
- Overall size: 48″ tall x 28″ wide x 36″ deep
- Build time: 1 day
- Skill level: Beginner
- Estimated cost to build: about $30 (lumber only)
Lumber you’ll need
- 1 board, 5/4x6x10′ treated deck board (back slats)
- 1 board, 5/4x6x8′ treated deck board (seat slats and a back slat)
- 4 boards, 2x4x8′ treated lumber (frame, arms and back supports)
Hardware
- 3″ exterior wood screws (frame)
- 2-1/2″ exterior wood screws (slats)
- 1-5/8″ exterior wood screws (wedges and slats)
Tools you’ll need
- Drill/driver
- Circular saw
- Speed square
- Tape measure and pencil
- Safety glasses and hearing protection
Common questions
Do I need cushions? No. It’s designed to be comfortable on bare wood. Add a cushion if you want, but it doesn’t need one.
Is it hard to build? No. There’s no joinery beyond screws. You build two side frames, add the angled back supports, tie the sides together with two cross pieces, then screw on six back slats and three seat slats with 1/2″ spacing.
What are the wedges for? A small wedge cut from the end of a 2×4 screws onto each back support in step 2. The cut list has a detail with its exact size and angles.
Want to see them in use? They’re the chairs around the fire pit in my pergola build. For more chairs, benches and tables, browse all my outdoor furniture plans.
You may also like…
Quick answers











Reviews
There are no reviews yet.