Small Entry Bench
So our dream, well goal, is to live in a farmhouse in the mountains. Raise our kids running around barefoot outdoors and teaching them values that cannot be taught through an iPad. I could go on forever, but I’ll get to the point. My wife is in love with the farmhouse style, so we made this sweet little entry bench that we hope will one day fit perfectly in our quaint little mountain farmhouse. Enjoy!
For sneak peeks of our upcoming projects be sure toΒ follow me on FacebookΒ andΒ Instagram. Also,Β follow me on PinterestΒ to get tons of projects plans from all around the web!
Required Tools
- Pocket Hole Jig
- Drill
- Miter Saw
- Table Saw (or access to 2x3s; see cut list)
- Tape Measure
- Pencil
- Safety Glasses
- Hearing Protection
Materials
- Qty 1 Β – Β 2 x 4 x 8″ Premium Stud
- Qty 1 Β – Β 1 x 4 x 6′ Common Board; Pine
- Qty 1 Β – Β 1 xΒ 6Β x 6′ Common Board; Pine
- 2-1/2″ Kreg Pocket Hole Screws (Coarse)
- 1-1/4″ Pocket Hole Screws
Disclosure: The links provided in the βmaterialsβ and βrequired toolsβ sections are affiliate links. If you would like to support our site and help keep our content free come find out more about how we can make money with no extra cost to you.
Dimensions
Cut List
Believe it or not you can actually find 2x3s (actual width = 2-1/2″) at most big box stores, so if you don’t have a table saw you can still build this project.
How to build aΒ small entry bench
Free and easy DIY plans for a small entry bench with farmhouse finish. No woodworking experience required.
I used some reclaimed lumber I had laying around. It’s super distressed and I think it turned out perfect for this project. You could just as easily use stock 1×6 lumber from the box storesΒ and distress it yourself.
Since our base and top are two different finishes we actually finished them prior to step three to make it easier on ourselves.
Finishing
When we were deciding on a finishΒ we really liked to the look of the natural finish for the top so to enhance and protect the natural beauty we used a tung oil finish. For the base we wanted that chippy white paint finish so we started off with Carrington wood stain from Varathane. Then, we applied Vaseline in the areas that we wanted to distress followedΒ by three coats linen white Chalked paintΒ all over. Β After the paint dried we came back with 220 grit sandpaper and a plastic scraper to distress and remove the paint in the areas where the Vaseline was applied.
Questions? Comments?
As always, if you have any questions donβt hesitate to comment below and especially donβt forget to post pictures of your finished products in the comments! ENJOY!
be careful sending your kids outside to play barefoot in the mountains. Step on a yellowjacket nest and you’re not likely to do it again soon. Also, thistle plants. These things seriously hurt. I’m always amused that people think mountain life is somehow always serene and safe and different from anyplace else. The lan is great, though.
Thanks for the tips! You remind me of my mom. We call her Mrs Safety. π
This plan and your whole website are awesome. Keep it up. I also like the mountain life because it’s so easy, serene, and beautiful…nothing like living on easy street in the mountains.
Thanks Jon. I appreciate the feedback. Having reader like you is why I keep doing what I’m doing. I hope sooner than later I’ll be able to enjoy that mountain life.
Great bench! Thanks for sharing!
Thank Sherry. And thank you for stopping by my site!
Thanks a lot for the pictures and plans you are sending me! They have been particularly helpful and inspiring!!
I’m glad to hear it!
Love this Jamison! The wood on top is just drool worthy, and I love the tapered legs!
Thanks Mindi. The wood from was some reclaimed lumber we got in downtown Savannah.
Loved the plans. The distressing tips were great. The only question that Mare has: What is the brand of boots? She has to have a pair….. Thanks for posting the boots next to the bench, there goes my occilating sander budget:)
haha sorry man! They are Frye boots…and only reason I know these things is because it’s on my wife’s birthday list every year.