Adirondack Chair

(64 customer reviews)

$10.00

Printable modern Adirondack chair plans: two board sizes, mostly straight cuts, and about an hour of beginner work for about $48 in treated lumber. 36″ tall x 32″ wide x 34″ deep. Includes the cut list with angles, 9 illustrated steps, and a tools and lumber list.

Easy Outdoor Bench

Printable plans for an outdoor bench with arms: crossed X legs, a two-board back and an armrest on each end, all cut from four pressure-treated 2x8x8 boards. It finishes 56" wide, 24-1/2" deep and 33" tall. Beginner level. Instant PDF download with the cut list, step-by-step diagrams and a shopping list.

Outdoor Bench - 2x8s

Printable 2x8 outdoor bench plans for a Leopold-style bench with back, built from four pressure-treated 2x8s in about 30 minutes. It finishes 51" wide x 24-1/2" deep x 33" tall. The instant-download PDF includes 4 pages of diagrams, a cut list, a shopping list and step-by-step instructions.

Buy Now →

✓ Instant download · Personal use license · Secure checkout via Stripe

Build the whole setGet this plan plus 4 more outdoor favorites in the Backyard Bundle$34Save $21See the bundle →
SKU: RE-ADIRONDACK-CHAIR Categories: , Tag:

Description

Modern Adirondack chair plans: two board sizes, mostly straight cuts

This is the Adirondack I designed for people who want the low recline and wide arms without a pile of curved templates. The legs are borrowed from my outdoor bench and tilted back to Adirondack angles, so almost every cut is a straight line off a circular saw. Only the back supports and the armrests need a jigsaw. It’s built from five treated boards, 5/4×6 deck boards and a 2×8, in about an hour of beginner-level work, for about $48 in lumber.

Watch the build

What you get

  • Printable PDF plan, instant download
  • Full dimensions
  • Cut list with every angle
  • 9 illustrated steps, from the leg tapers to the armrests
  • Tools and lumber shopping list

Specs

  • Overall size: 36″ tall x 32″ wide x 34″ deep
  • Build time: about 1 hour
  • Skill level: Beginner
  • Estimated lumber cost: about $48 (October 2026 pricing: three 5/4x6x8 deck boards at $7.48 and two 2x8x8s at $12.68)

Lumber you’ll need

  • 3 boards, 5/4x6x8′ treated deck boards (seat, back and armrests)
  • 2 boards, 2x8x8′ treated lumber (legs and supports)

Hardware

  • 2-1/2″ exterior wood screws, ACQ rated (regular screws corrode in treated lumber)
  • Optional: 3/8″ x 3-1/2″ galvanized carriage bolts, washers and nuts to beef up the leg and arm joints (8 to 10 bolts)

Tools you’ll need

  • Drill/driver and bits for pre-drilling
  • Miter saw or speed square for the angle cuts
  • Circular saw for the leg and arm tapers
  • Jigsaw for the back supports and armrests
  • Level, tape measure and pencil
  • Safety glasses and hearing protection

Common questions

How is this different from a traditional Adirondack? The traditional fan-back has a curved back, a scooped seat and curved stringers, with a lot of template work. This modern version keeps the recline and the wide flat arms and swaps the curves for straight tapered legs.

Is it hard to build? No. If you’ve built anything with a drill and a circular saw, you can build this. Pre-drill everything, especially the top of the leg, and check that the leg bottoms are even before you drive the first screw.

Can I leave it outside? Yes. It’s treated lumber, so it’ll silver over if you leave it bare, or take a coat of exterior stain if you want to keep it warm.

Want to read through it first? The full build is on the blog: easy modern Adirondack chair plans. It pairs with the outdoor chaise lounge and the outdoor club chair, which use the same lumber and tools.

64 reviews for Adirondack Chair

There are no reviews yet.

Be the first to review “Adirondack Chair”

Your email address will not be published. Required fields are marked *

You may also like…

Quick answers

Questions about this plan

How do I download my plan after purchase?
You will receive a download link in your order confirmation email. You can also log in at My Account → Downloads any time to re-download.
What format is the plan?
Every plan is a printable PDF designed for standard letter paper. View on screen in your shop, or print at home or your local print shop.
Can I sell what I build from this plan?
Yes — on a small scale. Most builders selling at local markets, online, or to friends are well within the license. Mass production or reselling the plan itself is not allowed. See the Plan License.
Do you offer refunds?
Digital downloads are generally final — see our Refund Policy. If there is a legitimate issue with the plan or your access, email support@rogueengineer.com.
Can I modify the plan dimensions or materials?
Yes — modify dimensions, materials, finishes, and joinery as you like for your own project. See the Plan License for what you can do with modified versions.