| | |

DIY Stacked Crate End Table

Disclosure: Affiliate links below may earn this site a small commission at no extra cost to you. All opinions — and the occasional questionable decision along the way — are 100% my own.

Quick answer: This stacked crate end table looks like two rustic crates stacked with an open shelf between — built from furring strips and pine 1x boards, all brad nails and pocket screws. Designed with April from Uncookie Cutter, whose build post shows it styled. Free tutorial below; the printable plans are $5.

📦
The look
Stacked crates
🪵
Lumber
Furring strips + pine
🤝
Collab
Uncookie Cutter
📄
Plans
Printable PDF — $5
Stacked crate end table styled next to a sofa

When April from Uncookie Cutter asked me to work with her on this stacked crate end table, I couldn’t pass it up — she did an amazing job, and we wanted to show exactly how you can build one too. See it styled at the Uncookie Cutter build post.

Stacked Crate End Table Plans printable plans cover
Printable Plans

Stacked Crate End Table Plans

The complete printable PDF — full cut list, dimensioned diagrams, and all four steps.

Get the plans — $5or keep scrolling for the free tutorial ↓

Tools & materials

Tools · 5 (+ layout)
Have on hand
🔧
Pocket hole jig
🔧
Drill / driver
🪓
Miter saw
🔨
Brad nailer
🛡
Tape, pencil, safety glasses, ear pro
Materials
budget pine
🪵
3× 1×2 @ 8 ft furring strips
🪵
5× 1×4 @ 8 ft + 2× 1×10 @ 8 ft pine
🔩
1¼″ pocket screws (coarse)
🪒
Wood glue + brad nails

Dimensions

Stacked crate end table dimensions

Cut list

Stacked crate end table cut list

The build, step by step

Step 1

Stacked crate end table plans step 1

Step 2

Stacked crate end table plans step 2

Step 3

Stacked crate end table plans step 3

Step 4

Stacked crate end table plans step 4

Every dimension, the full cut list, and the printable diagrams for each step are in the plans above.

Stacked Crate End Table Plans printable plans cover
Printable Plans

Stacked Crate End Table Plans

The complete printable PDF — full cut list, dimensioned diagrams, and all four steps.

Get the plans — $5instant download · printable PDF

Questions? Comments?

As always, if you have any questions don’t hesitate to comment below — and don’t forget to post pictures of your finished tables in the comments! ENJOY!

15 Comments

  1. Was wondering how you did the light?? Is it just a metal pole? Also how did you do the stencil? Where did you come up with that?

  2. Under the cut list it says “How to build a portable lumber rack”. It’s probably a copy-paste from a previous article. Just wanted to let you know. Great site by the way. I like people that are passionate about something of greater meaning.

Leave a Reply

Your email address will not be published. Required fields are marked *